VCK CCCP 2023-2024 User Guide

Note: Both iOS and Android can connect to the controller via Wi-Fi, with the network named VFD_Clock_AP. You don’t need to worry about complex operations due to numerous options, as our interface allows for direct selection and clicking. All information is displayed in English.

Wi-Fi Settings:

2.4GHz Wi-Fi Name: 

2.4GHz Wi-Fi Password:

Time zone: (Beijing time zone is +8)

Offset: (Network delay compensation, default = 0)

DST Time zone:

DST Start Rule:

DST End Rule:

NTP Server:

(*Time zone tips: Common examples include +1 for Paris, -5 for New York, and +9 for Tokyo.)

(*If there is no Daylight Saving Time (DST) in your region, simply set the DST Time zone, DST Start, and DST End Rule to 0.)

 

After configuring the above settings, click Send/Save Settings 1.

SET 1:

Single Click: Next RGB mode

Double Click: Previous RGB mode

Long Press: Turn RGB lights on/off

SET 2:

Single Click: Increase brightness. Set to AUTO for automatic light sensing or manual brightness adjustment.

Double Click: Toggle display mode between fixed time and scrolling time/date.

Long Press: Show clock IP address.

RGB LED Settings:

 

RGB Switch: On/Off

RGB LED Start Time:

RGB LED End Time:

LED Blinking Speed: (in milliseconds)

RGB Effect Modes: (Over 20 options available)

RGB LED Brightness Value:

RGB Color: (Can be manually adjusted on the color palette or directly input using the color code.)

After making adjustments, you can preview the settings. Click Save Settings to apply.

 

VFD Function:

Brightness: Adjust the brightness of the display.

Display Mode: Choose between flip or fixed time display.

Date Format: Select between US or UK date formats.

12/24 Hour Mode: Switch between 12-hour and 24-hour formats.

Wi-Fi Time Sync Switch: Enable or disable time synchronization via Wi-Fi.

Alarm Mode Switch: Turn the alarm function on or off.

Alarm Time: Set the alarm time.

Manual Set Time & Date:

Set Time:

Set Date: